Plasma-Arc Gasification and its ability to process a wide range of feedstocks

Waste To Energy, Waste Treatment Add comments

There are a number of perceptions within the marketplace regarding plasma-arc treatment and plasma-arc gasification processes. This stems from limited operating systems as well as “too-good-to-be-true” marketing claims made by some within the industry, some of these key points include:

o Ability to process a wider range of feedstocks that other thermal treatment technologies
o Smaller environmental and physical footprints
o Generate significant usable recyclable end-products and energy with no residual waste

Over the next few weeks, this blog will look to address each of these. With regards to the “Ability to process a wider range of feedstocks that other thermal treatment technologies”

As illustrated here , PEAT’s plasma-arc gasification waste-to-energy technology has been implemented treating a wide range of feedstocks. Further, the fact that the plasma-arc gasification heat source is independent of the waste being processed means that plasma-arc gasification systems can process waste with very low calorific values (i.e. high moisture and inorganics). Further, plasma-arc gasification systems can co-process a variety of waste streams simultaneously.

Following are the Peat’s Waste-To-Energy Systems / Waste Treatment Plants which has ability to process a wide range of feedstocks with Plasma Thermal Destruction Recovery (PTDR) Technology and convert waste streams into useful end-products (Syngas, Vitrified Glass, Concrete Aggregate, Road Bed/Fill, Sandblasting , and Recovered Metal Alloys).

PTDR-100
Waste Treatment Plant

.

PTDR-500
Waste Treatment Plant

.

PTDR-1000
Waste Treatment Plant

.

Leave a Reply

You must be logged in to post a comment.

 
Log in
More in Waste To Energy, Waste Treatment (37 of 46 articles)


Last week, we discussed and demonstrated how plasma-arc gasification nearly eliminates air emissions when the syngas is not utilized, this ...